You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

An old USB A/B cable is all you need to make your own Smart Home hardware! Cut off and discard the B-portion of the USB cable. On the A side, connect the RED (+) and WHITE (D-) wires via a 1 kiloohm resistor. $Picture: http://imgur.com/dJGVlAU Now plug the cable into a USB port on your Linux computer. Your hardware is ready! Run the above command after changing variable mysms to your personal email-to-SMS gateway info as required by your cellular service provider. The command uses the amazing usbmon tool (see link below) to detect the cable. For the curious, to view the raw usbmon output, run this command: (Also see the sample output) $usbmon -i usb0 How does it work? When the red and white wires are connected (via the 1 kiloohm resistor) the USB hardwere is tricked into thinking that a new USB device is trying to start up. We then use the usbmon utility to capture the host USB events as it tries to talk to the cable. The expect utility watches the usbmon stream and waits for the disconnect text "-2:128" before sending the SMS message. Finally, the sendmail tool is used to email the SMS message to your smartphone via your cellular provider's SMS-to-email gateway. As a result, when the electrical connection between the red and white wire is interrupted, or the USB cable is unplugged from your computer, you get an SMS notification of the disconnect event on your smartphone. Could this be the cheapest smart home gadget ever? What are YOU going to sense with it? Please let me know in the comments and please don't forget to click it up! $ $Links: $ http://www.linuxcertif.com/man/8/usbmon/ http://en.wikipedia.org/wiki/USB#Pinouts http://imgur.com/dJGVlAU

I often use it to find recently added ou removed device, or using find in /dev, or anything similar. Just run the command, plug the device, and wait to see him and only him

Apart from an exact copy of your recent contents, also keep all earlier versions of files and folders that were modified or deleted. Inspired by EVACopy http://evacopy.sourceforge.net

Replace 'csv_file.csv' with your filename.

This can be much faster than downloading one or both trees to a common servers and comparing the files there. After, only those files could be copied down for deeper comparison if needed.

Trace python statement execution and syscalls invoked during that simultaneously

Some computers these days don't have an HDD activity light, but they still have a useless caps-lock, so why not re-purpose that light to show HDD activity? Requires setleds and dstat and probably needs to run as root.

No curl and no sed, just wget :)